Personal tools
You are here: Home KV Series Aftermarket Sets 1/35 Scale 1/35 Scale Turrets

1/35 Scale Turrets

Manufacturer Code Description Material Fits Kit
A-Resin 35030 IS-85 Turret

Despite the name, this turret is equally applicable to the KV-85, and provides the correct symmetrical turret roof shape.
R TR
Azimut Productions 35332 KV-1S/KV-8S Turret R EE
Commander Series
Models
2016 KV-2 Model 1939 Backdate Set

This set provides an MT-1 turret but not the hull details such as the early road wheels with eight cooling vents, early stowage boxes etc.
R TA
2017 KV-8 Flamethrower Turret

Simplified welded turret with 45mm gun and flame projector.
R TA/TR/EE
Mig Productions
MP35-123 KV-1 Model 1939 Conversion Set

Despite the name, this set provides the initial 'rounded' turret as fitted to the first 11 KV s malenkiy bashniy between April and July 1940.  It is intended to convert the Tamiya KV-1C kit to this variant, but is better utilized in combination with with the Trumpeter "KV Small Turret" kit.
R TA/TR/EE
Model Point RC313-2 KV-1 M1942 Cast Turret

Reinforced cast turret with aluminum barrel
R/A TA/TR/EE
RC313-4 KV Tank Turret w/ 76mm F-32 Gun Jan-Jul 1940

This set provides a prototype turret with the F-32 gun, as fitted to 16 rebuilt U-series vehicles in early 1941. Not entirely accurate since it includes the circular marks on the turret roof not seen on these turrets, and also flanges on the episcope and ventilator covers. Use the Trumpeter KV 'Big Turret' kit for the donor hull.
R/A TR
RC313-5 KV Tank Turret w/ 76mm L-11 Gun Oct-Dec 1940

This set provides prototype turret with the L-11 gun as fitted to the first 14 vehicles in early 1940. Not entirely accurate since it includes the circular marks on the turret roof not seen on these turrets, and also flanges on the episcope and ventilator covers. The mantlet is also the late variety introduced in August/September, and lacks the groove on its right-hand side and the bolt on the upper face. Use the Trumpeter KV 'Big Turret' kit for the donor hull.
R/A TR
RC313-6 KV Tank Turret w/ 76mm L-11 Gun, U-7 Prototype,
April 1940

Not entirely accurate since it includes the circular marks on the turret roof not seen on these turrets, and also flanges on the episcope and ventilator covers. The mantlet is also the late variety introduced in August/September, and lacks the groove on its right-hand side and the bolt on the upper face. The set does not include the "airplane" fenders fitted to U-7 in April 1940. Use the Trumpeter KV 'Big Turret' kit for the donor hull.
R/A TR
RC313-7 KV Tank Turret w/ 76mm F-32 Gun, M1941 R/A TA/TR/EE
RC313-8 KV Tank Turret w/ 76mm L-11 Gun, Jul-Dec 1940

Early welded turret with L-11 Gun. Not entirely accurate since it includes the circular marks on the turret roof not seen on these turrets, and also flanges on the episcope and ventilator covers. The mantlet is the late type introduced in August/September and is therefore appropriate for a vehicle produced between then and December 1940. Use the Trumpter KV 'Small Turret for the donor hull, but sand the 'crease' in the upper edge of the rear hull overhang.
R/A TR
MR Models MR-35075 KV-1 Model 1940 Turret

Actually a malenkiy bashniy turret with the L-11 gun.  The set includes pressed steel return rollers (not typically seen on the KV s malenkiy bashniy or KV-1 Model 1939) and a set of six - not the correct seven - box-shaped 50-litre fuel/oil tanks, also not typical for these variants but useful for the spares box.
R TA/TR
MR-35077 KV-1 Turret Captured Wehrmacht

Actually a malenkiy bashniy turret with the L-11 gun and a German commander's cupola.
R TA/TR
MR-35076 KV-2 Model 1940 Turret

Actually an MT-1 turret appropriate for the 20 series production KV s bolshoiy bashniy from July/August 1940.  Note that the turret is actually too low; the MT-1 turret was 210mm (6mm in 1/35 scale) taller than the MT-2 turret.
 R  TA  
MR-35078 KV-2 Model 1941 Turret

Actually an MT-2 turret appropriate for a KV-2 Model 1940 from the second production batch in May/June 1941.  The kit also includes a set of pressed steel return rollers.
 R  TA  
R&J Products 35009 KV-2 Turret, Initial Production Version

Provides an MT-1 turret and backdates the driver's front plate. Numerous other changes will be necessary for an accurate KV s bolshoiy bashniy.
R TA
Tank Maker STZ022 KV-1 Uparmored Welded Turret

Actually a simplified welded turret with ZIS-5 gun.
R TA/TR/EE/ZV
STZ020 KV-8 Flamethrower Turret

Simplified welded turret with 45mm gun and flame projector.
R TR
Tiger Model Designs
 35-3006  KV 'Malenkiy Bashniy' Turret Shell (Corrected 1939 Turret)

Includes initial L-11 mantlet
   
Zavod 3D Miniatures NA ChKZ Armour Ring (2pcs)

Armored ring around the rear-facing MG, fitted to turrets manufactured for ChKZ by UZTM in late 1941. Intended for Tamiya's 2020 KV-1 kit release 35372
R TA
Document Actions